2
Installing the BBG-1300-FR
2-4
BBG-1300-FR PRODUCT MANUAL
BBG-1300-OM (V1.0)
Cable Connections
Figure 2-3 shows the BBG-1300-FR rear panel connections for power,
network, and reference loop.
Note:
Rear Module (Card) connections are a function of rear module used. Refer to
card manual for rear module connections.
Figure 2-3 BBG-1300-FR Rear Panel Connections
Power Connections
(See Figure 2-3.) BBG-1300-FR is equipped with two corded IEC power
input receptacle which mate to IEC cord sets.
Note:
For non-redundant AC power input, either receptacle can be used for power
connection. For redundant AC power inputs, connect both receptacles to
separate independent power sources.
1.
Connect supplied power cords (or equivalent) to IEC power input
receptacle(s) on BBG-1300-FR.
2.
Connect supplied power cords (or equivalent) to suitable AC power
outlet. BBG-1300-FR is not equipped with power switches; unit will
power up when power is applied.
Looping
Reference
Connectors
Network
Ethernet
Connector
Redundant Power Supply IEC AC
Line Connectors (2)
(cord-end receptacles not shown)
Rear I/O Module Area
(shown with rear module
installed)
PS1 Line Cord
Receptacle
PS2 Line Cord
Receptacle
Summary of Contents for BBG-1300-FR
Page 45: ......
