9902-UDX-FS-OM (V1.1)
9902-UDX-FS PRODUCT MANUAL
3-5
Operating Instructions
Control and Display Descriptions
Web HTML5 User Interface
(See Figure 3-4.) When equipped with a rear I/O module having an Ethernet
port, the 9902-UDX-FS controls can be accessed via a web network
connection with no additional remote control software needed. The web GUI
shows the same tabs, controls and status displays as those accessed using
DashBoard™. This allows very convenient control access to the card, even if
using a computer without DashBoard remote control or in case the frame
network connection is down.
The card can be accessed in a web browser by entering the card IP address as
set in the card
Admin
tab. (See Admin (p. 3-67) for more information.)
Note:
Card must be equipped with a rear I/O module with an Ethernet port, or
installed in a “smart” frame with per-slot Ethernet, to use html access. The
card address is entirely independent of, and requires no association with, the
frame openGear IP address.
Figure 3-4 Typical Web GUI Tabs and Controls
Typical web GUI Menu tabs
Typical web GUI controls and status displays
1
0.
9
9.
1
1.
1
1
9
I
P
:
The card edge alphanumeric
display, along with card model ID,
shows a scrolling message
showing current card IP address
(in this example, 10.99.11.119)