2
Installing a Rear I/O Module
2-8
9902-UDX-FS PRODUCT MANUAL
9902-UDX-FS-OM (V1.1)
Note: Rear module Ethernet port provides additional card communication functions separate from
frame-based (i.e., DashBoard) remote control. Rear module Ethernet port is not required to be used
for normal card DashBoard remote control. Ethernet port control/monitoring functions are described
in Chapter 3, Operating Instructions.
RM20-9902-UDX-FS-L
Provides the following connections:
• Four 3G/HD/SD-SDI video inputs (
SDI IN A thru
SDI IN D
• CVBS video input (
CVBS IN
)
• Eight 3G/HD/SD-SDI video outputs (
SDI OUT 1A
thru
SDI OUT 4B
; 1x2 DA output of each crosspoint
output)
• CVBS video output (
CVBS OUT
)
• COMM/GPIO RJ-45 connector
• ETHERNET 100/1000 BaseT Ethernet connector
Note: Available equipped with High-Density BNC
(HDBNC) or DIN1.0/2.3 connectors as:
RM20-9902-UDX-FS-L-HDBNC or
RM20-9902-UDX-FS-L-DIN, respectively.
1934D
RM20-9902-UDX-FS-M/S
Split Rear Module. Provides each of the following
connections for two 9902-UDX-FS cards:
• Four 3G/HD/SD-SDI coaxial input BNCs (SDI IN A
and SDI IN D)
• Six 3G/HD/SD-SDI Video Out BNCs (SDI OUT 1A
thru SDI OUT 4B)
Note: Available equipped with High-Density BNC
(HDBNC) or DIN1.0/2.3 connectors as:
RM20-9902-UDX-FS-M/S-HDBNC or
RM20-9902-UDX-FS-M/S-DIN, respectively.
1934D
Table 2-1
9902-UDX-FS Rear I/O Modules — continued
9902-UDX-FS Rear I/O Module
Description