3
9902-UDX-FS Function Menu List and Descriptions
3-72
9902-UDX-FS PRODUCT MANUAL
9902-UDX-FS-OM (V1.1)
(continued)
Table 3-2
9902-UDX-FS Function Menu List — continued
Ancillary Data Alarm Setup sub-tab allows setting up screening engagement and
disengagement holdoff for absence of closed captioning packets.
Note: • Video screened is the card SDI that is selected for the program video/audio path.
• Ancillary data condition detection is functional only for CEA608/708 packet-based
closed captioning. This feature does not function for SD line 21 “waveform-based”
closed captioning.
Alarm Propagation Tabs
Video, Audio, and Ancillary Data sub-tabs set alarm propagation attributes, including:
• Logging of alarms and conditions
• Propagation of alarms to the card general Card State/DashBoard frame-based tree-view pane
• Ignore alarm, or set severity as Warning (yellow “LED”) or Error (red “LED”)
Each of these sub-tabs is described below.
Video sub-tab independently shows for all four SDI inputs any LOS (loss of signal), frozen, or black conditions
triggered for any of the SDI IN A thru SDI IN D inputs.
Video
Condition/Status has LOS, Frozen, and
Black status fields for all 4 SDI inputs.
Illuminated “LED” indicates that condition is
presently occurring. Color of LED is
determined by user-set Severity level.
• Log (when checked) propagates the alarm to a log file.
• Alarm (when checked) propagates the alarm to the Card State and
frame-level DashBoard tree-view “LEDs”.
• Severity selects from Ignore/OK (green “LED”), Warning (yellow “LED”), and
Error (red “LED”) alarm escalation states.
• Duration and Last Occurence shows details for each triggered alarm event.
Note: The Log, Alarm, Severity, and Duration/Last Occurrence columns appear on the other alarm sub-tabs and function
identically as described here.
