6
Step Three
: Open Box B (Right Panel/Left Panel). The direction of the panel (Right vs. Left) is determined by
standing in front of the sauna. Install the Right and Left Panels by lining up the panels to the Front and Back
Panels. Using the Installation Bolts provided in the accessories box, hand tighten the Installation Bolts
through the holes in the side panels to the Front and Back Panels. A final tightening of the Bolts will be
performed with a screwdriver after the sauna is completely assembled.
*Do not over tighten installation bolts. It will cause damage to the sauna cabin*
Step Four
: From Box C, install the Bench Support Panel by lining up the magnets on the ends of the Bench
Support Panel with the magnets located on the wall of the Left and Right Wall Panels. Make all four electrical
connections using the four-outlet receptacle on the Back-Wall Panel.
Summary of Contents for Delmar
Page 20: ...20 Control Panel Instructions ...
