87
CARAVAN EQUIPMENT
- It is possible to allow the ventilator to
work for 5 minutes on the highest speed
(boost). To do this push for 3
seconds on the button S1 (extraction) or
S2 (intake). After 5 minutes the ventilator
returns to its previous speed
setting. See table in Fig. 3.
- For reasons of security, the ventilator
stops when the tension is too high (19,5v)
or too low (11,1v) or when the fan is
blocked. For trouble shooting see Fig. 4.
MAINTENANCE
The ventilator grid can be removed for
cleaning. Also the mosquito screens can be
taken out for cleaning.
The roof light is only waterproof in the
direction of the traffic. When transporting
the caravan in the opposite direction or
when the back of the caravan is up,
ensure the dome is watertight by using
the ‘Lock-unlock’ (not supplied on a
ventilator version) or by using something
that ensures that the dome remains
closed when being transported.
THE HEKI 2 ROOFLIGHT
The Heki 2 roof lights provide
a maximum of 13,200mm of
fixed ventilation.
1. To open to the tilted
position:
a) Press the button in the
toggle catches on either side
of the dome and turn through
approx. 90º.
b) Grasp the metal bar in the
middle, snap it out of its
holder, swivel down and push
the dome upwards. (Dome is
held by the two gas springs
after approx. 150mm).
c) Swivel the metal bar towards the dome
and snap into its holder.
d) To close the dome, proceed with steps (a-
c) in reverse order.
2. To open in the intermediate position:
a) Open the toggle catches on either side of
the dome.
b) Grasp the metal bar in the middle, snap it
out of its holder, swivel down and push
the dome outwards.
(Dome is opened automatically by the two
gas springs after approx. 150mm.
c) Open both black fasteners and swivel the
metal bar toward the intermediate position
and pull the dome down until the metal
bar is stopped by the fasteners.
d) To close, proceed with steps (a-d) in
reverse order.
3. To open in the ventilation position:
a) Open the toggle catches on either side of
the dome.
b) Using both hands on the two toggle
catches, press the dome up about 2cm
and fasten the toggle catches in the
corresponding setting.
c) To close, proceed with steps (a-b) in
reverse order.
Fig 3
Fig 4
A5 Owners Handbook 2015_2_Layout 1 26/08/2014 16:20 Page 87
