Coachman Caravan 2015 Owner'S Handbook Manual Download | Manualshive

Page: 29 / 114

background image

FORE AND AFT LEVELLING

Place the spirit level ‘fore and aft’ and using
the jockey wheel adjustment level the
caravan horizontally.

Wind down the corner steadies onto load
spreaders (blocks of wood a minimum of 6
inches (15.25cm square) taking care not to
lift the caravan wheels.

It is important that the caravan is correctly
levelled to ensure the correct working of the
refrigerator, cooker etc.

Your caravan should not be operated at
an angle greater than 3 degrees.

PARKING ON A REVERSE –
SLOPING SITE OR STEEP HILL

For successful parking on a reverse slope or
steep hill, the operator need only apply the
handbrake with one hand while gently but
purposely inching the caravan or trailer a
small distance backwards with the other.

CONNECTING SERVICES

Connection of services is dealt with under
separate headings.

In all cases become

familiar with manufacturers’ instructions.

Before making connections of any
description to the caravan ensure ALL
equipment is turned off and that where
appropriate switches are moved to the off
positions.

WATER

Your caravan will be fitted with a Flowjet on-
board pump (Vision and Pastiche), a Truma
Ultraflow Filter water system (VIP) or on
Laser models the Ultraflow is combined
with a Whale Underfloor Tank System. To
determine which model you have, please
refer to the Coachman brochure.

Under no circumstances should mains
water be connected to the caravan
without a pressure reducer.

If using the system after a storage period,
carry out checks as outlined in “Setting up
the Water System”.

Fill fresh water container and place in
suitable position. Place waste water
receptacles in position.

Place the submersible pump or filler pipe
(dependant on system) into the water
container, ensuring that it is fully submerged
before operating the system.

WASTE CONNECTION

Your caravan is fitted with a 28mm waste
water system. Two waste water outlets are
located on the offside of the caravan to the
rear of the wheels. These outlets connect to
standard waste hose, which can then be
inserted into suitable waste water
containers.

28

ARRIVAL AT SITE/CONNECTING SERVICES - WATER

Caution: Never enter the caravan
without first lowering the four corner
steadies with the brace provided.
Corner steadies should not be used
as a jacking device.

WARNING: If the handbrake is NOT
fully applied (i.e. vertical) and is set to
some lesser position than the full
vertical, then problems will almost
certainly arise after the trailer has
been uncoupled from the towing unit.
On steep hills or sloping sites always
chock the caravan wheels.

A5 Owners Handbook 2015_2_Layout 1 26/08/2014 16:20 Page 28

«
...
27
28
29
30
31
...
»

Summary of Contents for Caravan 2015



















































































































Reviews:

No comments

Related manuals for Caravan 2015

Brand: Four Wheel Pages: 15

Brand: Lance Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands