Introduction
1 - 5
4. Connect the print server to printer(s).
Note:
One port print server attaching only one printer,
further three ports print server can expand three
printers, for example, the print server’s port1 should
be connect printer1, port2 or port3 as following
above step.
5. Plug the AC power adapter into the power receptacle in
the side of the print server.
6. Plug the AC power module into the wall out-let, the print
server is switched on after you plug it in.
7. Check the LED’s marked as
status
on topside or beside
of the print server. It should be flash five times normally,
if not, please contact your local dealer for repair or
replacement.
8. Turn on the power on your printer(s) to begin printing.
