manualshive.com logo in svg

CNC-Step AceroDURO 100/S100, Operating Instructions Manual

Share
Download
CNC-Step AceroDURO 100/S100 Operating Instructions Manual Download Page 61

 

Operating Instructions 

                                                      

AceroDURO 

 

 

 

 

CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany

 

Page 61 

Support: +49 (0)2831/91021-50                                                              15/05/2020 

 

 

WARNING: 
Injuries caused by falling materials! 

In operation, chips, tools (or parts thereof) may fall uncontrollably down or may be 
thrown out and cause serious injury to skin and eyes. 

•

 

Wear face shield or fully enclosed goggles, protective clothing, gloves and 
safety shoes.  

•

 

If particles enter the eye, seek immediate medical attention. 

Unexpected start of the machine 

 

WARNING: 
Risk of injury from unexpected starting of the machine! 

The machine and the tools may start unexpectedly, change direction or stop. Limbs 

can get captured. 

•

 

Make sure that no body parts enter the danger area of the machine.  

•

 

Secure work area from accidental access. 

 

Highly inflammable substances 

 

WARNING: 
Fire hazard due to flammable materials! 

Organic dusts from coal or wood or inorganic dust of magnesium, aluminium, zinc 
or titanium can catch fire and cause serious or even fatal injuries. 

•

 

Within the danger zone and in the vicinity do not smoke. Do not use open 
flames or sources of ignition.  

•

 

Keep fire extinguisher ready.  

•

 

Processing of light metal alloys such as magnesium, aluminium, zinc and 
titanium without suction and appropriate security measures is not allowed.  

•

 

Stop work immediately in case of fire. Evacuate danger area until the all-
clear is given. 

 

 

 

Cooling emulsion 

 

 

ATTENTION: 
Risk of health damage by contact with cooling emulsion! 

Contact with cooling emulsion can lead to health damage. 

•

 

Avoid skin contact.  

•

 

Remove the cooling emulsion immediately from the skin.  

Summary of Contents for AceroDURO 100/S100























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands