Operating Instructions
AceroDURO
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 56
Support: +49 (0)2831/91021-50 15/05/2020
Fig. 24: Stepper motors of axis
1 Connect the plug of the stepper motor and
control cable with the following assignment
to the stepper motor controller:
•
X-axis stepper motor (Fig. 24/1) to
terminals X1 and X2 of the stepper
motor controller
•
Y-axis stepper motor (Fig. 24/2) to
terminal Y, the stepping motor
control
•
Stepper motor Z-axis (Fig. 24/3) to
terminal Z of the stepper motor
control
•
Emergency stop switch, limit and
reference switches to port ST stepper
motor control
2 Secure cable connections with the knurled
screw from loosening.
6 . 3 . 3
Ins talling Accessories
NOTE:
The equipment installation is carried out according to the specifications of the
accessories associated operating and assembly instructions.
WARNING:
Risk of injury due to improperly mounted accessories!
Improperly mounted accessories can lead to uncontrolled falling or throwing out
during operation and cause serious injury to skin and eyes.
•
Mount accessories professionally according to the safety regulations.
Install milling motor
Personnel:
•
Specialist personnel
1
2
3
