CNB XPEED Indoor Series, Installation And Operation Manual

Page: 19 / 39

XPEED Indoor Series WWW.CNBTEC.COM
4. OSD Menu
⊙
OSD Display of Main Screen
19
• P/T/Z Information Current Pan/Tilt angle in degree, zoom magnification and a compass direction.
• Camera ID Current Camera ID (Address).
• Action Title Followings are possible Action Titles and their meaning.
“SET PRESET xxx” → When Preset xxx is stored
“PRESET xxx” → When camera reach to preset xxx
“PATTERN x” → When Pattern x is in action
“SWGx/PRESET xxx” → When Swing x is in action
“UNDEFINED” → When undefined function is called to run
• Preset Label The Label stored for specific Preset.
• Alarm Information This information shows current state of sensor input and relay output.
If the Input and output points are ON state it will show a number corresponding to each point
When they are OFF state, ‘-’will be displayed.
Ex) point 2&3 of inputs and 1 of output are ON, OSD will show as below