CNB XPEED Indoor Series, Installation And Operation Manual

Page: 2 / 39

XPEED Indoor Series WWW.CNBTEC.COM
2
~
Important Safety Instructions
„
Read Instructions
•
Read all of the safety and operation instructions before using the product.
„
Retain Instructions
•
Save these instructions for future reference.
„
Attachments / Accessories
•
Do not use attachments or accessories unless recommended by the appliance manufacturer as they may cause hazards, damage product
and void warranty.
„
Installation
•
Do not place or mount this product in or on an unstable or improperly supported location. Improperly installed product may fall, causing
serious injury to a child or adult, and damage to the product. Use only with a mounting device recommended by the manufacturer, or
sold with the product. To insure proper mounting, follow the manufacturer’s instructions and use only mounting accessories.
recommended by manufacturer.
„
Power source
•
This product should be operated only from the type of power source indicated on the marking label.
~
Precautions
„
Operating
•
Before using, make sure power supply and others are properly connected.
•
While operating, if any abnormal condition or malfunction is observed, stop using the camera immediately and then contact your local
dealer.
„
Handling
•
Do not disassemble or tamper with parts inside the camera.
•
do not drop or subject the camera to shock and vibration as this can damage camera.
•
Care must be taken when you clean the clear dome cover. Especially, scratch and dust will ruin your quality of camera.
„
Installation and Storage
•
Do not install the camera in areas of extreme temperature, which exceed the allowable range.
•
Avoid installing in humid or dusty places.
•
Avoid installing in places where radiation is present.
•
Avoid installing in places where there are strong magnetic fields and electric signal.
•
Avoid installing in places where the camera would be subject to strong vibrations.
This lightning flash with arrowhead symbol is intended to alert The user to
the presence of un-insulated “dangerous voltage”
Within the product’s enclosure that may be of sufficient magnitude
To constitute a risk of electric shock to persons.
This exclamation point symbol is intended to alert the user to
The presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.