CNB XPEED Indoor Series, Installation And Operation Manual

Page: 28 / 39

XPEED Indoor Series WWW.CNBTEC.COM
4. OSD Menu
■ EDIT PRESET SCENE
① Using Joystick, move camera to desired position.
② By pressing NEAR key, save current PTZ data.
③ Press FAR key to cancel.
■ EDIT PRESET LABEL
① Edits label to show on monitor when camera arrives at presets.
In Edit label menu, a reverse rectangular is cursor.
As soon as finishing selecting alphabet, cursor moves to the next digit.
② Using Left/Right/Up/Down of joystick, move to an appropriate character from the Character set.
To choose that character, press the NEAR key.
If you want to use blank, choose Space character(“ ”). If you want To delete a character before, use
back space character(“ ← ”).
③ If you complete the Label editing, move cursor to “OK” and press NEAR key to save completed
label. To abort current change, move cursor to “Cancel” and press NEAR key.
■ EDIT RELAY OUT
• RELAY OUT N [ON/OFF]
Sets relay output when changing preset position.
28