CNB SxB2xZ12F N, User Manual

Page: 5 / 47

◎ 1/4'' High Sensitivity CCD
◎ x12 Optical Zoom, x12 Digital Zoom(Max x144)
◎
Day & Night, BLC (Backlight Compensation), WDR(Wide Dynamic Range),
ECL(Eclipse)
◎
Auto-Focus, Manual Focus, Semi-Auto Focus.
◎
Multi language OSD.
◎ 360°/sec high-speed movement to preset position.
◎ Simultaneous pan/tilt action when moving to preset locations for fast and natural
view transition.
◎ Low speed 0.05°/sec. joystick movement for accurate operation. The joystick speed
automatically changes as the zoom rate changes for easier operation.
◎ Up to 255 cameras can be connected in the same network.
◎ Pelco-D, Pelco-P, and BOSCH protocol can be used.
◎ Various camera functions can be configured through the OSD (On Screen Display)
Menu.
◎ Information such as Camera ID, Pan/Tilt location, Direction, Alarm In/Output, Preset
can be displayed.
Video Specification
Pan/Tilt Control
Multi-Language OSD Menu
PTZ Control
Alarm In/Output
7 6
automatically changes as the zoom rate changes for easier operation.
◎ 127 preset locations can be stored, and each preset location can have its own image
settings and label.
◎ 8 Swing functions. (continuously swinging in between 2 pre-set locations back and
forth)
◎ 4 Patterns (Saves specific Joystick operations and endlessly repeats them.)
◎ 8 groups (running a combination of up to 20 preset/pattern/ swing actions saved by
the user in sequence)
※ Maximum numbers for each function differs in each protocol
(Refer to “Function numbers in each protocol”, Page 59)
◎ There are 4 Alarm Inputs and one alarm output.
◎ In order to filter out the external noise, use a port coupling at the input and a relay
at the output.
◎ The sensor can be set to Normaly Open or Normaly Close
◎ Sensor inputs can be DC 5~12V.
◎ Relay output can be up to AC 125V/0.5A or DC 24V/1A.
◎ A Sensor input can be configured to move the PTZ to any preset location.
Preset, Pattern, Swing, Group