CNB SxB2xZ12F N, User Manual

Page: 18 / 47

◎ This menu configures all Motion functions of the
PTZ.
. • MOTION LOCK [ON/OFF]
- When the Motion Lock is on, users can only run
Preset, Swing, Pattern, and groups. Those
functions can not be deleted or edited.
However, all other OSD menu can be accessed
and changed.
• PWR UP ACTION [ON/OFF]
- Please refer to “Other Functions”
• AUTO FLIP
[ON/OFF]
- Please refer to “Other Functions”
◎ This function automatically runs a pre-configured
operation when the camera is not in use for the
configured "Wait Time“.
• PARK ENABLE [ON/OFF]
• WAIT TIME [1 min.~4 hours]
- Gets displayed in “hh : mm : ss” format, and it
can be incremented by minutes.
• PARK ACTION
[HOME/PRESET/PATTERN/SWING/GROUP]
- "HOME" would bring the PTZ location to the
initial position when the camera is not in
operation for the given time.
Motion Setup
PARKING ACTION Setup
33 32
- Please refer to “Other Functions”
• JOG MAX SPEED [1°/Sec~360°/Sec]
- Sets the maximum speed of the joystick operation. Zoom speed gets reduced in
higher magnifications for easy controlling.
• JOG DIRECTION
[INVERSE/NORMAL]
- In Inverse mode, the screen moves to the same direction with the Joystick. In Normal
mode, the screen moves to the opposite direction from the Joystick.
• FRZ IN PRESET
[ON/OFF]
- Turn this on to freeze the image while the PTZ moves to a preset location.
operation for the given time.
◎ This configures preset operations in response
to Alarm inputs.
• ALARMx TYPE
[NORMAL OPEN/CLOSE]
- Configures Normal types for each Alarm input
• ALARMx ACTION [NOT USED/PRESET 1~128]
- Activate desired Alarm inputs and enter which
preset location to be loaded.
ALARM INPUT Setup