• Description :
In Swing mode, the PTZ will continuously swing between two preset
positions. It will first move from the first position to the second clockwise, and then it will
go from the second position to the first counterclockwise.
If you set the first and the second position the same, the camera will continuously do
a 360
°
tour. The moving speed can be selected in between 1
°
/Sec and 180
°
/second.
• To Configure :
Configure the pattern operations using either of the two following methods.
1) Set Pattern [Pattern No.]
- The screen shown in the figure will open.
- Operate the joystick or keyboard controller to move
the PTZ the way you want for the pattern.
- Remaining time to save the operation is displayed
on the bar.
- To finish the operation and save, press NEAR button. Or
press FAR button to cancel.
2) The same can be configured in the OSD Menu.
• To Run :
• To delete :
A pattern can be deleted in the OSD Menu.
Swing
EDIT PATTERN 1
[NEAR:SAVE /FAR:DELETE ]
■■■■■■ ■■■■■■ ■■■■■■■
0/0/x1/N
1) Run Pattern [Pattern No.]
ex) To run Pattern 2 : Run Pattern [2]
2) Go Preset [Preset No. + 130]
ex) To run Pattern 2 : Go Preset [132]
1st Preset
2nd Preset
23
22
°
°
°
• To Configure :
use the OSD menu.
• To Run :
• To Delete :
A Swing can be deleted in the OSD Menu.
• Description:
A Pattern saves and repeats a series of pan/tilt/zoom and preset
operations. A maximum four patterns can be saved, and maximum 1200 operations
can be saved in each pattern.
• Description :
A Group saves and repeats a series of Preset, Pattern, and Swing actions.
A maximum 8 Groups can be saved, and each group can contain maximum 20 actions
(Preset, Pattern, or Swing). In a Group, a moving speed for Presets and repeat numbers for
Patterns and Swings can be configured. In addition, a hold time in between the operations
can also be configured.
• To Configure :
Use the OSD Menu for configuration.
• To Run :
• To Delete :
A Group can be deleted in the OSD Menu.
Pattern
Group
Preset 1
Pattern 1
Swing 1
Hold Time
Max. 20 Actions
1) Run Pattern [Swing No. + 10]
ex) To run Swing 3 : Run Pattern [13]
2) Go Preset [Swing No. +140]
ex) To run Swing 3: Go Preset [143]
1) Run Pattern [Group No. +20]
ex) To run group 7: Run Pattern [27]
2) Go Preset [Group No. +150]
ex) To run group 7: Go Preset [157]
Summary of Contents for SxB2xZ12F N
