CNB SxB2xZ12F N, User Manual

Page: 20 / 47

• SWING NO. [1~8]
- Select a Swing No. to configure. The 1 st and 2 nd
Position will be displayed as “NOT USED”
if the swing number was not used before.
• 1st POS, 2nd POS [PRESET 1~128]
- Select two positions to Swing. When an unused
preset number is selected, "UNDEFINED“ will be
displayed.
◎ When a
Swing is loaded, it will first move from the first position to the second clockwise,
and then it will go from the second position to the first counterclockwise. If you set the first
and the second position the same, the camera will continuously do a 360
°
tour.
• SWING SPEED
[1°/Sec ~ 180°/Sec]
◎ Move the PTZ to a desired starting position. Press
NEAR
button to start recording
the pattern operation.
Press
FAR Button to cancel the edit.
◎ The selected presets and joystick operations during this period will be saved in the
Swing Setup Edit Pattern
NEAR
37 36
• SWING SPEED
[1°/Sec ~ 180°/Sec]
- Sets the Swing speed.
• CLEAR SWING [CANCEL/OK]
- Deletes the selected Swing Number.
• PATTERN NO. [1~4]
- Select a Pattern number to configure.
“UNDEFINED” is displayed underneath the Pattern
number when an unused pattern number is
selected.
• CLEAR PATTERN [CANCEL/OK]
- Deletes the selected pattern number.
• EDIT PATTERN
- Starts recording the pattern operations.
◎ The selected presets and joystick operations during this period will be saved in the
pattern. The time left to record the operations is displayed in the bar at the top of
the screen. 1200 operations can be saved in a pattern.
◎ Press NEAR button to finish and save the recording. Press FAR button to discard
recording and exit.
• GROUP NO. [1~8]
- Select a Group Number to configure.
“UNDEFINED” is displayed underneath the
Group No. when an unused number is selected.
• CLEAR GROUP [CANCEL/OK]
- Deletes the selected Group Number.
• EDIT GROUP
- Opens the Edit Group menu.
Pattern Setup
Group Setup
SWING SETUP
SWING NO .
2ND POS .
1
PRESET 5
NOT USED
1ST POS .
☞
UNDEFINED