AN241
www.hoperf.com
Copyright © By HOPERF
V0.4 | Page 22/41
No.
Function
Description
10000, active packet sending test, limit of 5000 times;
After selecting the corresponding modulation and demodulation mode,
selection can be confirmed by short pressing K2 or K5, and return to the
upper menu (that is, the main menu).
2.17 Payload Content Submenu
Select the
15 Payload Content
and press K5 to enter the submenu, as shown in Figure 2-19
CM T2 31 0A EB GU I
15 Pa yl o ad Co nten t
i n crea si n g s eq
1. Option area
Figure 2-19. Submenu of Payload Content
No.
Function
Description
1
Rolling option area
The options can be switched by short pressing K3 or K4
：
Increasing seq: the contents of active packets are filled in an
order sequence and started from 0 with increasing of 1 each
time and overflow until it reaches 255, and then starts from 0
again;
random sequence
；
active packets are filled with random
sequences;
After selecting the corresponding modulation and demodulation mode,
selection can be confirmed by short pressing K2 or K5, and return to the
upper menu (that is, the main menu).
