AN241
www.hoperf.com
Copyright © By HOPERF
V0.4 | Page 21/41
No.
Function
Description
1
Rolling option area
The options can be switched by short pressing K3 or K4
：
Off
，
disable the Gaussian filter transmission
；
BT03
，
enable the Gaussian filter transmission with BT
coefficient as 0.3;
BT05
，
enable the Gaussian filter transmission with BT
coefficient as 0.5;
BT08
，
enable the Gaussian filter transmission with BT
coefficient as 0.8;
BT10
，
enable the Gaussian filter transmission with BT
coefficient as 1.0;
After selecting the corresponding modulation and demodulation mode,
selection can be confirmed by short pressing K2 or K5, and return to the
upper menu (that is, the main menu).
Note
：
1. After Gaussian transmission is enabled, 2FSK is 2GFSK modulation mode. 4FSK indicates the 4GFSK
mode
；
2.16 Test Counter Submenu
Select the
14 Test Counter
and press K5 to enter the submenu, as shown in Figure 2-18.
CM T2 31 0A EB GU I
14 Te st C ou nte r
Co nti nuo us
1. Option area
Figure 2-18. Submenu of Test Counter
No.
Function
Description
1
Rolling option area
The options can be switched by short pressing K3 or K4
：
Continuous, no limit number of the active packet sending test
；
100, active packet sending test, limit of 100 times;
200, active packet sending test, limit of 200 times;
500, active packet sending test, limit of 500 times;
1000, active packet sending test, limit of 1000 times;
2000, active packet sending test, limit of 2000 times;
5000, active packet sending test, limit of 5000 times;
