CMi 401 133, Original Instructions Manual

Page: 49 / 162

49
– Maintain the device in accordance with
the instructions in the operating instruc-
tions.
– Avoid working at low temperatures.
– When it is cold, make sure your body and
your hands, in particular, are kept warm.
– Take regular breaks and move your
hands at the same time to promote circu-
lation.
• Symbols appearing on your product may
not be removed or covered. Information
on the product that are no longer legible
must be replaced immediately.
Personal protective equipment/sensible
clothing
When cutting, wear the following protective
equipment:
Avoid with your clothing that you get caught
on something:
• Wear only close-fitting clothing!
• Do not wear any jewellery!
• If you have long hair, wear a hair net!
Your device at a glance
►
P. 3, item 1
1. Rear handle
2. Fill opening for chain oil (tank cap)
3. Front hand guard (trigger for chain brake)
4. Saw chain
5. Saw rail
6. Fastening nut (for saw rail)
7. Chain wheel guard
8. Sight glass for oil level
9. Rear hand guard
►
P. 3, item 2
10. Safety lock
11. On-Off switch
12. Strain relief mechanism for extension
cable
13. Front handle
Scope of delivery
• Drive unit
• Saw rail
• Saw chain
• Spanner
• Protective cover
• Instructions for use
Be careful when handling the de-
vice! Observe all safety instruc-
tions in the instructions for use!
Read and observe the operating
instructions before commission-
ing.
Unplug the mains plug before per-
forming any maintenance!
If the mains cable is damaged, pull
out the plug.
Do not expose the machine to
moisture.
Area with a danger of kickback
Always hold the device firmly in
both hands.
Always maintain a sufficiently safe
distance.
Length of the saw rail
Eye protection: wrap-around gog-
gles/protective visor on the helmet
Ear protection: earplugs/ear muffs
Head protection: safety helmet with
visor
Foot protection: safety shoes with
gripping soles, steel caps and leg
protection
Hand protection: protective chain-
saw gloves
XXX mm
Clothing: safety overalls (cut-proof),
Safety jacket (cut-proof)
DANGER! Risk of death through
electric shock!
The use of this vari-
ant outside Switzerland is not per-
missible for safety reasons, as this
poses a risk of electric shock or fire.
The variant of the product sold in
Switzerland may only be used in
Switzerland, as it is equipped with a
Swiss plug.
You can identify the variant by
means of the item number on the
product (the instructions always con-
tain all item numbers):
Item number Switzerland: 468 599
Item number in other EU countries:
401 133
GB
Kettensaege_Elektro_401133.book Seite 49 Montag, 19. Oktober 2015 5:17 17