background image

Cette scie à chaîne a été conçue et fabriquée conformément 
aux strictes normes de fiabilité, simplicité d’emploi et sécurité 
d’utilisation. Correctement entretenue, elle vous donnera des années 
de fonctionnement robuste et sans problème.

AVERTISSEMENT :

 

Pour réduire les risques de 

blessures, l’utilisateur doit lire et veiller à bien comprendre le 
manuel d’utilisation avant d’employer ce produit. 

Merci de votre achat.

Su motosierra inalámbrica ha sido diseñada y fabrica-
da de conformidad con nuestras estrictas normas para  
brindar fiabilidad, facilidad de uso y seguridad para el opera-
dor.  Con el debido cuidado, le brindará muchos años de sólido  
y eficiente funcionamiento.

ADVERTENCIA: 

Para reducir el riesgo de lesiones, 

el usuario debe leer y comprender el manual del operador antes 
de usar este producto. 

Le agradecemos su compra.

CONSERVER CE MANUEL POUR 

FUTURE RÉFÉRENCE

GUARDE ESTE MANUAL PARA 

 FUTURAS  CONSULTAS

SAVE THIS MANUAL FOR FUTURE REFERENCE

Your chain saw has been engineered and manufactured to our high standard for dependability, ease of operation, and 
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.

WARNING:

 

To reduce the risk of injury, the user must read and understand the operator’s manual before using 

this product. 

Thank you for your purchase.

OPERATOR’S MANUAL

MANUEL D’UTILISATION
MANUAL DEL OPERADOR

40 VOLT CHAIN SAW

SCIE À CHAÎNE 40 V

MOTOSIERRA DE 40 V

RY40500

Summary of Contents for RY40500






























Reviews: