GENERAL WARNINGS
The manufacturer of the equipment cannot be held responsible for damage caused by failure to oblige to the requirements below.
WARNINGS FOR THE INSTALLER
• Read this manual carefully. It provides important information on safe installation, operation and maintenance of the equipment;
• Installation, conversion to other type of gas, and maintenance of the equipment must be carried out by personnel qualified and authorized by the
manufacturer, in compliance with safety regulations and instructions included in this manual;
• Identify the model of the equipment. The model is shown on the packaging and on the nameplate of the machine;
• Install the equipment only on sites where there is good ventilation;
• Do not obstruct the ventilation and exhaust holes on the machine;
• Do not tamper with the equipment components.
ATTENTION
After installing the machine, the installer is required to
fi
ll in the "Installation Form" that goes with the machine.
On this form must be con
fi
rmed the hygiene and safety requirements in force on the installation site and must be reported
any notes relating to changes or interventions necessary for the proper functioning of the equipment.
Filled copies of the Installation form must be kept by the user and by the installer until the end of life of the machine.
In case of withdrawal of the machine, the installer must also provide for the withdrawal of the user's Installation form.
