10
P/N: 192065084 Rev AA March 2020
(ENGLISH)
ENGLISH
RECOMMENDED SPARE PARTS
Ratchet Disc Assembly
Latch Kit
Upper & Lower Hook Assembly
Alterations or modifications of equipment and use of any parts
other than CM
®
653-A Series lever hoist repair parts can lead to
dangerous operation and injury.
TO AVOID INJURY:
Do not alter or modify equipment. Do use only CM
®
653-A Series
provided replacement parts.
PREVENTATIVE MAINTENANCE
In addition to the inspection procedures, a preventative maintenance program should be established to prolong the useful life of the hoist
and maintain its dependability and continued safe use. The program should include the periodic inspections with particular attention being
paid to the lubrication of various components using the recommended lubricants (See Figure 13).
TESTING
Prior to initial use, all repaired or used hoists that have not been operated for the previous 12 months shall be tested by the user for proper
operation. Test the unit first in the unloaded state and then with a light load of 100 pounds (45 kg.) times the number of load supporting parts
of load chain to be sure it operates properly and the brake holds the load when the lever is released; then test with a load of 125% of rated
capacity.
In addition, hoists in which load sustaining parts have been replaced must be tested with 125% of rated capacity by or under the direction of
a designated person and a written report prepared for record purposes.
NOTE:
For additional information on Inspection and Testing refer to ASME B30.21 “Manually Lever Operated Hoists” obtainable from ASME
Order Department, 22 Law Drive, Box 2300, Fairfield, NJ 07007-2300, U.S.A.
INSPECTOR’S REPORT
ITEM
REMARKS (LIST DEFICIENCIES AND RECOMMENDED ACTION)
Inspector’s
Signature
Date
Inspected
Approved by
Date
Figure 12 - Recommended Inspector’s Report
RECOMMENDED LUBRICATION SCHEDULE*
CM
®
653-A SERIES HAND OPERATED LEVER HOISTS
COMPONENT
TYPE OF LUBRICANT
ORDER PART NO.
TYPE OF SERVICE AND FREQUENCY OF LUBRICATION
Load Chain
Oil (See page 8)
28619 (1 gal. can)
HEAVY
NORMAL
INFREQUENT
Daily
Weekly
Monthly
Gears, Bushings, Liftwheel
bushings & Pinion shaft
Grease (See page 8)
28618 (1 lb. can)
When hoist is disassembled for cleaning or repairs
(*) This lubrication schedule is based on a hoist operating in normal environment conditions. Hoists operating in adverse atmospheres containing excessive heat, corrosive fumes or vapors,
abrasive dust, etc., should be lubricated more frequently.
Figure 13 - Recommended Lubrication Schedule
