Club Car V-GLIDE, Maintenance Service Supplement

Page: 29 / 112

ELECTRICAL SYSTEM AND TESTING Test Procedures
2004 V-Glide 36-Volt Electric Vehicle Maintenance and Service Supplement Page 11-17
11
3. Make sure all the contacts are tight and the V-Glide wiper switch housing is not melted or burned around
the contacts. If the housing or fixed contacts are damaged, the entire wiper switch housing with contacts
must be replaced.
4. Make sure nuts attaching wires to the backs of the fixed contacts are tightened to 40 in-lb (4.5 N·m).
Figure 11-21 Wiper Arm Brush and Fixed Contacts Figure 11-22 Wiper Arm Brush Wear Limit Line
RIGHT WRONG WRONG
Wiper arm brush and fixed contacts
should seat firmly against each other.
WIPER
ARM
BRUSH
FIXED
CONTACT
WIPER ARM BRUSH
WEAR LIMIT LINE
SIDE VIEW
WIPER ARM
BRUSH