![background image](http://html1.mh-extra.com/html/club-car/iq-plus-2008/iq-plus-2008_maintenance-and-service-manual-supplement_2626727064.webp)
IQ DISPLAY MODULE (IQDM) SERIES 2 AND IQDM-P DIAGNOSTICS
Introductory Display
Page 12-2
2008-2011 IQ Plus Electric Vehicle Maintenance and Service Supplement
12
INTRODUCTORY DISPLAY
Immediately after the handset is connected to the vehicle, it begins loading the vehicle speed controller infor-
mation. After a few seconds, the screen displays the following menu items:
•
Program (IQDM-P)
•
Monitor
•
Faults
•
Functions
•
Information
•
Programmer Setup
In the event that the handset does not display any information, or the screen is difficult to read, refer to the
IQDM Series 2 troubleshooting procedures.
See IQDM and IQDM-P Handset Troubleshooting on
MENU NAVIGATION
The NAVIGATION BUTTON is the four-arrow button located on the left side of the handset
. This button is used to navigate through and select menus. Pressing the up or down arrows allows
the user to scroll through the menu items. When the box beside the desired menu is blinking, pressing the
right arrow selects that menu item. Pressing the left arrow allows the user to go back one screen.
The CHANGE VALUE BUTTON is the button located on the right side of the handset
This button allows the user to change values by pr or –.
The three yellow buttons labeled 1, 2 and 3 are BOOKMARK BUTTONS
. These but-
tons allow the user to bookmark up to three specific screens for rapid return to those screens. To bookmark a
specific display screen, have the desired screen displayed and simply press and hold a bookmark button until
the statement “bookmark set” is displayed. When it is necessary to go back to the bookmarked screen, rapidly
press and release the appropriate bookmark button.
See following NOTE.
NOTE:
When going to a bookmarked display screen, be sure to rapidly press and release the button. If the
button is pressed and held for too long, the bookmark will be overridden with the current screen.
The three yellow buttons also allow for quicker input of serial number and car decal number. Press and hold
“+” or “-” while holding buttons 1, 2 or 3 to accelerate a number search.
The following menus are accessible on the IQDM Series 2 handset:
Program (IQDM-P only)
The
program
menu allows the user to view and change custom speed controller settings.
Monitor
The
monitor
menu displays values for certain parameters to facilitate speed controller troubleshooting.