Pre-Operation and Daily Safety Checklist
WARNING
• With the switch in the MAINTENANCE position and the engine running, the vehicle can move suddenly
if the Forward/Reverse handle is shifted or accidentally bumped. To prevent this, chock the front and
rear wheels and firmly set the park brake before servicing or leaving the vehicle.
NOTE:
Be sure to return the switch to the OPERATE position after servicing the vehicle, or it will not run with the
Forward/Reverse handle in either the FORWARD or REVERSE position.
BED LATCH
See General Warnings on page 9.
The bed latch (1) is located under the front corners of the bed
(Figure 18, Page 23)
and engages automatically when
the bed is closed. To lift the bed, pull the bed latch toward the side of the vehicle and lift the bed.
To close the bed gently lower the bed to a closed position. DO NOT drop the bed.
See following WARNING.
WARNING
• Keep hands and fingers clear of crush area between the bed and the seat back support.
1
42
Figure 18
Bed Latch
PRE-OPERATION AND DAILY SAFETY CHECKLIST
Each Club Car vehicle has been thoroughly inspected and adjusted at the factory; however, upon receiving your new
vehicle(s), you should become familiar with its controls, indicators, and operation. Carefully inspect each vehicle to
ensure that it is in proper working condition before accepting delivery.
Use the following checklist as a guide to inspect the vehicle. This checklist should be used daily to ensure that
the vehicle is in proper working condition and in conjunction with the Performance Inspection on page 24 and the
Periodic Service Schedules on page 35. Any problems should be corrected by a Club Car distributor/dealer or a
trained technician.
Carryall 100 CE Mark Owner’s Manual
Page 23