www.cls-led.com
www.cls-led.com
7
8
PROGRAMMING TABLE
PROGRAMMING TABLE
DMX Function
Data
Parameters
Description
CH1 Set address
001 to 255
0
0 = no change
Use this DMX channel to set address from 001 to
255. The configured DMX address is called “n”
1…255 DMX address = 1…255
CH2 Set address
256 to 508
0
no change
Use this DMX channel to set address from 256 to
508. The configured DMX address is called “n”
1…255 DMX address = 256…508
CH3 Static
behavior
0
no change
If no DMX is present the fixture will respond like
set in this function.
1
last DMX value
2
output off
3
load static values
CH4 Soft dim
0
no change
Soft dim will interpolate between the DMX
values. This function makes the dim curve
smoother
1
off
2
on
CH5 Master
control
0
no change
If master is first channel is selected the channel
will be DMX channel “n”. If master is last channel
is selected the channel will be “n+x”
(“x” is calculated in the output patch).
1
no master used
2
master is first channel
3
master is last channel
CH6 Output 1
patch
0
no change
Each output channel can be patched to respond
to the desired DMX channel. This enables the
user to mix up the colours according to the
controller that is used.
Example: all outputs are patched as 1
All outputs will be controlled by DMX channel
“n”. If master is used total DMX channels will be 2
otherwise it uses 1 channel (“x” = 1).
Example: output 1&2 are patched as 1 and 3&4
are patched as 2
Output 1&2 will be controlled by DMX channel
“n”.
Output 3&4 will be controlled by DMX channel
“n+1”.
If master is used total DMX channels will be 3
otherwise it uses 2 channels (“x” = 2).
1
DMX channel n
2
DMX channel n+1
3
DMX channel n+2
4
DMX channel n+3
CH7 Output 2
patch
0
no change
1
DMX channel n
2
DMX channel n+1
3
DMX channel n+2
4
DMX channel n+3
CH8 Output 3
patch
0
no change
1
DMX channel n
2
DMX channel n+1
3
DMX channel n+2
4
DMX channel n+3
CH9 Output 4
patch
0
no change
1
DMX channel n
2
DMX channel n+1
3
DMX channel n+2
4
DMX channel n+3
CH10 Static output
1
0
no change
Each output channel can be set to an static
intensity.
If no DMX is present and Static behavior is set to
“load static values”. The outputs will be set to the
configured intensity values.
1
output off
2…255 intensity 2…255
CH11 Static output
2
0
no change
1
output off
2…255 intensity 2…255
CH12 Static output
3
0
no change
1
output off
2…255 intensity 2…255
CH13 Static output
4
0
no change
1
output off
2…255 intensity 2…255
CH14 Load default
settings
0
no change
This function resets all settings to the Factory
setting. Check Factory setting table.
X
Load Factory settings. X is row
number factory setting table.
Multiple connection
Daisychain connectivity
Installation depth
In centimeters
Swivel
Fixture is horizontally rotatable,
indicated in degrees
Swivel
Fixture is vertically rotatable,
indicated in degrees
Installation size
In centimeters
Application area
Indoor or outdoor
Application area
Floor, wall or ceiling
Protection class
One, two or three
Cable length
Maximum cable attached
to the fixture in centimeters
Lifespan
Of the light source in hours
Driver
Inclusive or exclusive
Internal or external
Pressure
Maximum pressure on the
fixture in kg/cm
2
Weight
In grams/kilograms
Curve
Minimal bending curve
in centimeters
LED pitch
Pitch between the LEDs
in millimeters
Power supply
In VDC, VAC or milliAmpere
Power consumption
In VA or Watt
IP value
Ingress Protection classifies the
degrees of protection provided against
the intrusion of the product
Cutting length
Indicated by the cutting
marks
LEDs
Kind of LED used in the
fixture
Lenses
Availble lenses,
indicated in degrees
Plug & play
Easy connection using the
SmartConnect system
White colour temperature
In different Kelvin values;
Cold white, neutral white, warm
white or extra warm white
Colour
Available colours;
Amber, blue, red or green
Colour changing
RGB, RGB-W, RGB-A,
AWB or Tunable White
DMX input
Fixture works on DMX512
protocol
Magno dimming
Accurate dimming from
100 - 1% by using a magnet
Dynamic Control
Dynamic Power Control or
Dynamic Temperature Control
Combined product
Compose your own fixture
Warranty
3 or 5 years warranty on
the product
Energy label
Conformité Européenne
CE marking for free marketability
of industrial goods within the EU
r
h
ø
w
d
Dimmable
1-10 Volt, Phase, individual,
DMX dimmable or DALI
DRIVER
INCLUDED
DRIVER
EXTERNAL
Retail & Food LED modules
Clothing, furniture, kitchens, jewellery,
shoes, bread, meat,
fish & vegetables & fruit.
Lightsource
Equipped with a CLS, Citizen or a Xicato
LED module
Bluetooth controlled
By Casambi
CLS
DYNAMIC
COLOUR
COB
LIST OF SYMBOLS
