cloudworks CDS541 User Manual Download Page 5

Page: 5 / 29

USER MANUAL :

DOCUMENT NAME



Onboard 24V 30mA power generator. The

of 30mA allowing for the powering of an external piece of equipment or current loop device eliminating the need
for a secondary power supply. This



2 x Pulse inputs with echo output

measured amount of product. The echo output will allow this logger to be connected in conjun
device requiring use of the same pulse output.



1 x Digital input - Used for general input application.



1 x Digital output (max 500mA at 50



Large onboard non-volatile memory

Application dependent.



Logging intervals from 1 minute to 1 month. Information is internally logged, time and date stamped and

transmitted at programmable intervals



Remote programming of all setup parameters via GPRS link or SMS.



Ideal for leak detection, alarming and water shut



Onboard Bluetooth can stream diagnostic information about signal strength,



Pushbutton and LED's for manual wakeup to server and diagnostic purposes etc.

1.3

Specifications



GPRS multi-slot class 12/ EDGE multi



Onboard GPS



Bluetooth interface



Option of mains/solar power with battery failover and sleep



All management software supplied free



Standard Alkaline Batteries - 3 x D cells



ECO Interface for GWF meters



24V 30mA Generated power output



2 x Pulse inputs with echo out



1 x Digital input



1 x 500mA max 50V Output



Isolated 4-20mA Input port



11000 Record datalog memory (application dependent)



Full SMS driven command set



Logging intervals 1 minute to 1 month



Rugged housing with padlock eye



Pushbutton and LED Diagnostics



Configuration and diagnostics through Bluetooth interface



Fully configurable remotely



Stream data in real-time when powered by mains or 12V supply



Size 175mm x 180mm x 78mm (including cable glands)



Housing Protection Class - IP65



Environment : -20°C to 80°C humidity

MANUAL : CDS541 CUMULUS PULSE LOGGER

NAME

CLASSIFICATION

DATE

PAGE

Onboard 24V 30mA power generator. The Cumulus Pulse logger can generate a stable 24V output at a maximum

of 30mA allowing for the powering of an external piece of equipment or current loop device eliminating the need

option will also function under battery operation.

2 x Pulse inputs with echo output - Pulse inputs are used on metering devices that supply a pulse output for a

measured amount of product. The echo output will allow this logger to be connected in conjun
device requiring use of the same pulse output.

sed for general input application.

50V) - This output can be used to operated a valve, solenoid or similar device.

volatile memory - This logger can record in excess of 11000 records for later download.

Logging intervals from 1 minute to 1 month. Information is internally logged, time and date stamped and

transmitted at programmable intervals.
Remote programming of all setup parameters via GPRS link or SMS.
Ideal for leak detection, alarming and water shut-off control to prevent water loss.
Onboard Bluetooth can stream diagnostic information about signal strength, network status etc.

utton and LED's for manual wakeup to server and diagnostic purposes etc.

slot class 12/ EDGE multi-slot class 12/ 3G (UMTS/HSPA) Modem Technology

power with battery failover and sleep

All management software supplied free

3 x D cells

utput

(application dependent)

onth

Configuration and diagnostics through Bluetooth interface

time when powered by mains or 12V supply

Size 175mm x 180mm x 78mm (including cable glands)

20°C to 80°C humidity ≤ 90% non condensing. Check battery specifications for low power systems