USER MANUAL :
DOCUMENT NAME
2.1 Setup via Bluetooth Configure
Once the Bluetooth connection has been established, Cloudworks
screen needed for each device type. This device will immediately be placed into Command Mode and the current setup
data retrieved and displayed on the right hand screen.
Data update commands are sent to the device only after the parameter setup field has been left. What this means is that
while adjusting a parameter in its input box, no commands are sent to the logger. Once you have completed entering the
field and leave it for the next function, only then will the command be sent.
Datalogging functions are suspended while a
the settings can be reread by pressing the 'Get Current Setup' button in the
An important thing to note is that if a logger
sent from the software, it will automatically exit Command Mode and re
of a battery powered logger, go back to sleep
not reconnecting to the server.
MANUAL : CDS541 CUMULUS PULSE LOGGER
NAME
CLASSIFICATION
DATE
PAGE
Setup via Bluetooth Configure
Once the Bluetooth connection has been established, Cloudworks will automatically activate the correct configuration
screen needed for each device type. This device will immediately be placed into Command Mode and the current setup
data retrieved and displayed on the right hand screen.
nt to the device only after the parameter setup field has been left. What this means is that
while adjusting a parameter in its input box, no commands are sent to the logger. Once you have completed entering the
ly then will the command be sent.
Datalogging functions are suspended while a logger is in Command Mode
. At any point, with the logger
the settings can be reread by pressing the 'Get Current Setup' button in the top menu.
logger is in Command Mode for longer than 60 seconds without any commands being
sent from the software, it will automatically exit Command Mode and re-establish a connection to the server, or in the case
go back to sleep
. This is to prevent a logger accidently being left in this mode and therefore
PAGE
will automatically activate the correct configuration
screen needed for each device type. This device will immediately be placed into Command Mode and the current setup
nt to the device only after the parameter setup field has been left. What this means is that
while adjusting a parameter in its input box, no commands are sent to the logger. Once you have completed entering the
logger in Command Mode,
is in Command Mode for longer than 60 seconds without any commands being
establish a connection to the server, or in the case
accidently being left in this mode and therefore
