8
Screw the Jig into the Digital Force Gauge. Turn about 3-4 times and do not tighten all the way.
However screw the Jig until the Control Lever faces up, aligning with the Digital Force Gauge.
1
Align the Holder underneath the Digital Force Gauge.
2
Fasten the Holder to the Digital Force Gauge with Screws (x4).
3
Loosely tighten the Screws (x4) to affix the Digital Force Gauge to the Fabric Kit,
enough so that Digital Force Gauge can be moved.
4
Shift the Digital Force Gauge to vertically align the Jig as the image below.
5
Tighten Screw B to affix the Digital Force Gauge Holder to the Fabric Kit.
If the Digital Force Gauge is not affixed properly, the measured Force values may not be accurate.
6
Use total of eight screws to assemble. Remaining two screws are extra.
4. HOW TO ATTACH THE DIGITAL FORCE GAUGE TO THE FABRIC KIT
Summary of Contents for FABRIC KIT
Page 1: ......