CLO FABRIC KIT Manual Download Page 2

1

FABRIC KIT SUPPLEMENTAL TERMS OF SALE

EQUIPMENT WARRANTY

Covered Components: CLO Fabric Kit components covered by this Limited Warranty 
(refer to the Components Section in the Fabric Kit Manual):
 

•  Stretch Test Device
•  Bending Test Device
•  Thickness Gauge
•  Stencil
•  Scale
•  Charging Adapter

2

3

4

5

CLO Virtual Fashion, Inc. (“

CLO

”) warrants to the end user purchaser (“

Customer

”) that the components of the CLO Fabric 

Kit described above (each, a “

Covered Component

”) will be free in all material respects from manufacturing defects, under 

normal and intended use as described in the Fabric Kit Manual furnished by CLO (“

Documentation

”), for a period of one 

(1) year from Customer’s original date of purchase of the CLO Fabric Kit, from CLO, its affiliates, or its authorized resellers 
(“

Warranty Period

”). If a Covered Component fails to conform to the foregoing warranty and CLO receives a valid written 

claim within the Warranty Period, CLO will, at CLO’s option and expense: (a) use commercially reasonable efforts to repair 
or replace the defective Covered Component or part with a new or refurbished Covered Component or part, or (b) accept 
the return of the Fabric Kit and refund to Customer the full original purchase price of the Fabric Kit. The foregoing warranty 
is CLO’s sole obligation and Customer’s sole and exclusive remedy for any defects in a Covered Component. Repair or 
replacement of a defective Covered Component or part does not extend the original Warranty Period for such Covered 
Component.

Exclusions and Limitations. This warranty is void and does not apply to: (

a

) damage resulting from mishandling, abuse, 

misuse, accident, negligence, or the Customer’s failure to properly calibrate a Covered Component or follow installation or 
operating instructions, (

b

) normal wear and tear, (

c

) defects caused by alterations, modifications, repair and servicing not 

made or authorized by CLO, (

d

) damage caused by handling, operating, storing, and using the Fabric Kit outside the 

permitted or intended uses described in the Documentation, including but not limited to use in wet conditions, (

e

) defects 

that are not reproducible by CLO, and (

f

) batteries used in a Covered Component. Actual battery life varies depending on 

use. This warranty is also void and does not apply if Customer opens the casing of any Covered Component.

Instructions to Obtain Warranty Service. In order to receive any remedy under this Limited Warranty, Customer must follow 
CLO’s RMA Procedures (See Fabric Kit Return and Exchange Policy).

EXCEPT AS STATED ABOVE IN THIS LIMITED WARRANTY, AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICA-
BLE LAW, CLO DISCLAIMS ALL EXPRESS, IMPLIED, AND STATUTORY WARRANTIES AND CONDITIONS WITH RESPECT 
TO THE FABRIC KIT AND ANY COVERED COMPONENT, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILI-
TY AND FITNESS FOR A PARTICULAR PURPOSE. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, CLO 
ALSO LIMITS THE DURATION OF ANY APPLICABLE IMPLIED WARRANTIES OR CONDITIONS TO THE DURATION OF 
THIS LIMITED WARRANTY.

Summary of Contents for FABRIC KIT















Reviews: