CLIVET WSAN-YSi R32, Manual, Page: 8 / 74

Suitably protect the unit to prevent
damage.
spacer bar
3 - BEFORE INSTALLATION
spacer bar
30.2-40.2
Unit on pallet
Reception
You have to check before accepting the delivery:

That the unit hasn’t been damaged during transport
 That the materials delivered correspond with that indicated on
the transport document comparing the data with the
identification label positioned on the packaging.
In case of damage or anomaly:
 write down on the transport document the damage you found
and quote this sentence: “Conditional acceptance clear
evidence of deficiencies/damages during transport”

wontact by fax and registered mail with advice of receipt to
supplier and the carrier.
NOTE
 Any disputes must be made within 8 days from the date of
the delivery. Complaints after this period are invalid .
Storage
Respect the indications on the outside of the pack.
In particolar:
 minimum ambient temperature –20°C
(possible components damages)
 maximum ambient tempe48°C
(possible safety valve opening)
 maximum relative humidity 95%
(possible damages to electrical components
NOTE
 The unit may not be tilted more than 15° during transport.
NOTE
Removal of packaging
Be careful not to damage the unit.
Recycle and dispose of the packaging material in compliance with
local regulations.
10.1-14.1 16.2-22.2
1 630 640
2 200 200
1
2