CLIVET WSAN-YSi R32, Manual, Page: 35 / 74

Set MODE and TEMPERATURE
Press MENU
Press

or

to select MODE
Press OK
Press

or

to select the mode or the temperature
Press

or

to adjust the mode and temperature.
Press OK to confirm.
If no operations are performed for more than 60
seconds, the system automatically saves the settings
and returns to the home page.
Note
During cooling with T ext < 15°C, the setpoint is forced
to 10 °C (ref. Functioning limits)
DOMESTIC HOT WATER
The ACS, if present and enabled, must be activated.
Press MENU
Press

or

to select MODE
Press OK
Press t or u to select the DHW mode
Press On-Off
Press OK to confirm.
USER MENU
Press MENU
8 - CONTROL
SILENT MODE
TEMPERATURE COMPENSATION
SNOW - BLOWING SWITCH
HEATER CONTROL
DHW SWITCH