Models DC-1, -10, -20B DC Spark Testers
DC-1, -10, -20B Instruction Manual
–
Page 25
If the display is locked it will require entry of the PIN number before it will
unlock. The factory default PIN code is 111.
If the display is unlocked, the display will lock to the
“PLM”
mode that is set in
the configuration menu.
For more information see “Configuration Menu
Options” be
low.
Configuration Menu Options
--
This configures the
“Output Function”
assigned to the hardware output
labeled “OUT0”, XXX is the configured
function. For sub menu items, see
the
“
Spark Tester Outputs
”
section of this manual.
--
This configures the
“Output Function”
assigned to the hardware output
labeled “OUT1”
, XXX is the configured function. For sub menu items, see
the
“
Spark Tester Outputs
”
section of this manual.
--
This configures the
“Output Function”
assigned to the hardware output
labeled “OUT2”
, XXX is the configured function. For sub menu items, see
the
“
Spark Tester Outputs
”
section of this manual.
--
This configures the
“Output Function”
assigned to the hardware output
labeled “OUT3”
, XXX is the configured function. For sub menu items, see
the
“
Spark Tester Outputs
”
section of this manual.
--
This displays that the
High Voltage Enable “HVE”
is assigned to the
hardware input labeled “IN0”.
This input is not re-assignable.
--
This
displays that the Fault Reset “FR”
is assigned to the hardware input
labeled
“IN1”
. This input is not re-assignable.
--
This is the password (PIN) configuration menu. For sub menu items
press B.