manualshive.com logo in svg

Climax FF1200, Operating Manual

Share
Download
Climax FF1200 Operating Manual Download Page 18

Risk assessment and hazard mitigation

Page 4

FF1200-FF2400-FF3600 Operating Manual

1.5

R

ISK

 

ASSESSMENT

 

AND

 

HAZARD

 

MITIGATION

Machine Tools are specifically designed to perform precise material-removal oper-
ations.

Stationery Machine Tools include lathes and milling machines and are typically 
found in a machine shop. They are mounted in a fixed location during operation 
and are considered to be a complete, self-contained machine. Stationery Machine 
Tools achieve the rigidity needed to accomplish material-removal operations from 
the structure that is an integral part of the machine tool.

Portable Machine Tools are designed for on-site machining applications. They typ-
ically attach directly to the workpiece itself, or to an adjacent structure, and 
achieve their rigidity from the structure to which it is attached. The design intent is 
that the Portable Machine Tool and the structure to which it is attached become 
one complete machine during the material-removal process.

To achieve the intended results and to promote safety, the operator must under-
stand and follow the design intent, set-up, and operation practices that are unique 
to Portable Machine Tools.

The operator must perform an overall review and on-site risk assessment of the 
intended application. Due to the unique nature of portable machining applications, 
identifying one or more hazards that must be addressed is typical. 

When performing the on-site risk assessment, it is important to consider the Porta-
ble Machine Tool and the workpiece as a whole.

Summary of Contents for FF1200































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands