7
etc.
5.
# =
Terminates Function Selection
6.
ACK
= Function Selection
Acknowledgement
On CTC-1052-QT:
Short beep: Command succeeded
Long beep: Command failed
On the programming phone set:
Short beep: Command succeeded
Long beep: Command failed
Follow the Command Steps to program
your CTC-1052-QT:
Step 1.
Enter Command number (DTMF
Numeric Command, ex. (
01
), (
02
)…)
Step 2.
Press (
#
) to terminate the DTMF
Command.
Step 3.
One short beep will be heard for
successful Command entry.
Step 4.
Enter the desired Command function
number.
Step 5.
Enter (
#
) to terminate the Command
Operation.
Step 6.
CTC-1052-QT will emit a short beep,
indicating successful programming.
The maximum interval between key strokes is 2
minutes
.
Otherwise, commands will be ignored
and CTC-1052-QT will automatically exit to Idle
Mode.
Any erroneous programming must be
rectified and program again correctly.
Command 00
Caller ID
Command (
00
) can be used to program 20
Caller ID(s).
When an incoming call matches with any of
the programmed Caller ID(s), CTC-1052-QT
will auto-answer the call without checking
access code or any button press.
CTC-1052-QT will match the numbers
starting from the last digit, and verify 10
digits at the most.
For example, if a number string 321 is
programmed, CTC-1052-QT will instantly
pick up any call that has 321 as the last 3
digits.
If a number string 17605851848 is
programmed, CTC-1052-QT will instantly
pick up any call that has 7605851848 as the
last 10 digits. The first digit "1" of the Caller
ID will be ignored.
Up to 20 digits are allowed for each Caller
ID.
Function
Selection
Result
(201-220)
Set Caller ID
(1
st
– 20
th
Caller ID)
To set a Caller ID:
Step 1:
Enter
00
+
#
on the phone set, then a
short beep will be heart via the
phone set.
Step 2:
Enter the Caller ID Sequence (
201-
220
) followed by the
*
symbol, and
then the
Caller ID
, and the
#
symbol
at the end to terminate Function
Selection.
Example: 201*27912518#
201 represents it being the 1
st
Caller ID.
27912518 represents the Caller ID
Step 3:
A short beep will be heart via the
phone set if Function Selection is
successful.
Command 01-04
Telephone Number Programming
Used to program the 1
st
-
4
th
Tel. numbers
respectively.
To program the 1
st
Tel. number: enter (
01
)
followed by (
#
). After one short beep, enter
(
telephone number)
followed by (
#
).You
can hear one beep from the telephone
speaker that indicates the programming is
successful.
