4
2. Learn-in the Devices
There are three methods to learn in devices:
command learning
,
local learning
, and
Learn-In Device using Device ID
.
The system can learn a total of 20 sensors. All
learnt-in sensors will be assigned to zone 1-20
sequentially.
2.1. Command Learning
Command Learning
:
The user can use Commands 93-94 to learn
devices into the system.
1.
Command 93
is designed to learn in
devices for silent reporting, including
WTR, Fall Sensor, or Panic Button.
2.
Command 93 & 94
are designed to learn
in the following devices and sensors.
PIR Sensor ----- PIR
Smoke Detector ---- SD
Carbon Monoxide Detector---- CO
Fixed Panic Button ---- PB
Wrist Transmitter ---- WTR
Pendant Transmitter ---- WTR
Water Sensor ---- WS
Fall Sensor ---- FS
Medication Dispenser
The PC Programming Tool (1052-QT-Tool)
also supports
Command Learning
. Please
refer to
4.5 PC Programming Mode 4.5.1.5
Device
for detailed instructions.
2.2. Local Learning
Local Learning
:
The user can also use the local learning
method to learn in all devices.
1. When the device is learnt in for the first
time, voice prompt will prompt the
device/sensor name and “learned.”
2. Within 3 minutes after exiting learning
mode, the control panel will emit 1 long
beep everytime it receives a test code (from
any device).
To enter Local Learning Mode:
1. Press and hold the Multi-function Button of
the CTC-1052-QT. When pressed, the
CTC-1052-QT will emit one beep sound
initially, and then emit a double beep on the
6
th
second followed by a voice prompt
Release the button.
” Release the Multi-
function Button right after the double beep
and the voice prompt.
2. CTC-1052-QT will enter learning mode as it
plays the voice prompt
“Ready to learn
sensor, Press sensor button
”. The Red LED
will start flashing
3. Press the (Learn) button on the device or
sensor.
Voice Prompt: “(Name of Sensor)
learned.”
4. If no action within 10 seconds after the
prompt
“Ready to learn sensor, Press
sensor button
”, CTC-1052 will prompt
“Press sensor button.” This prompt will
repeat two times if no action.
5.
If no action after second “Press sensor
button” prompt, CTC-1052 will prompt
“Press the button to exit.” This prompt will
be repeated three times if no action
continutes.
6. If no action (no device button is pressed)
after 5 minutes, the CTC-1052-QT will
automatically exit Local Learning Mode and
return to idle mode.
Voice Prompt: “We are
now in Normal Operation Mode.”
2.3. Learn-In Device using
Device ID
If sensor device ID is given (please consult
the supplier), the users can learn the device
into the Control Panel using device ID.
User can use SMS commands or the
programming tool SMS iWizard (sold
separately) to learn devices using device ID.
Please refer to the table
CTC-1052-QT SMS
Programming Command Table
or the SMS
iWizard operation manual on how to learn in
devices into different zones using device ID.
