49
GB 05/2009
AW HT
“ENDUSER LEVEL” SYSTEM OPERATING STATUS”
The operating status of the heat pump in the different modes can be checked as follows:
• Press the INFO button (6)
• Read the message shown on the display
• Turn the knob (4) to display the operating status of each utility (Heat pump, DHW, etc.)
• Press ESC (7) to exit.
The message displayed is shown in the following table under the column
“Enduser (from INFO button)”
.
“ENGINEER LEVEL” SYSTEM OPERATING STATUS
Parameters from 8000 to 8022 are used to check the operating status of the heat pump and the connected utilities.
Accessing the parameters displays the extended message for the operating status of each utility.
The message displayed is shown in the following table under the column “Engineer level (from parameter 8000)”.
SYSTEM OPERATING STATUS
A
4
7
6
Parameter
number
Description
Heating circuit 1 status
Domestic hot water production status
Heat pump status
Buffer storage status
Additional external source status
Default setting
8000
8003
8006
8010
8022
Parameters contained on the STATUS operating page
