25
GB 05/2009
AW HT
The settings that are not available directly using the buttons
are managed in programming mode.
The individual settings are arranged into operating pages
and rows and are divided into levels, “Enduser and Engi-
neer”, so as to allow access only to specific groups of para-
meters. The “OEM” level is protected against accidental
modifications by a password.
The main screen shown in the figure is the starting point for
all the settings.
ENDUSER level.
The procedure described below is used to access the oper-
ating pages in the “Enduser Level” and set the correspond-
ing group of parameters.
Below is an example of the procedure used to set the lan-
guage. The same procedure is valid for displaying and set-
ting all the Enduser level parameters.
1. Main display
If the main display is not shown, press ESC.
2. Press OK
The operating pages are shown at the bottom of the dis-
play.
3. Turn the knob and select the desired operating page.
For example Operator section.
4. Press OK to confirm.
In this example the bottom of the display shows the first
row “language” and at the top right the parameter num-
ber, “20”.
5. Press OK to set the parameter.
The display shows the value flashing, in the example
“Italian”.
6. Turn the knob and select the desired value of the para-
meter.
For example, “English”.
7. Press OK to confirm.
The settings have been saved.
The display stops flashing.
8. Either continue setting other parameters or press ESC
once to access other operating pages
twice to return to the main display.
AUTO
0
4
8
12
16
20
24
Room temperature
AUTO
0
4
8
12
16
20
24
Room temperature
Time of day and date
0
4
8
12
16
20
24
AUTO
Operator section
PROG
No.
0
4
8
12
16
20
24
AUTO
PROG
Time of day and date
Operator section
Programma orario CR 1
No.
Operating
page
0
4
8
12
16
20
24
AUTO
PROG
No.
20
Operator section
Language
English
0
4
8
12
16
20
24
AUTO
PROG
No.
20
Operator section
Language
English
Parameter
number
0
4
8
12
16
20
24
AUTO
PROG
No.
20
Operator section
Language
English
0
4
8
12
16
20
24
AUTO
PROG
No.
20
Operator section
Language
English
AUTO
0
4
8
12
16
20
24
Room temperature
OPERATION AND FUNCTIONS OF THE ROOM UNIT IN PROGRAMMING MODE
A
