M O N T A G E A N V I S N I N G
4
PANCAKE
HEAT PAN
S t e p
D
– A s s e m b l y o f t h e d r a i n a g e h o s e & h e a t i n g c a b l e
( i f a k i t i s p u r c h a s e d )
1.
Pull the heating cable through the pan adapter.
2.
Pull the heating cable through the drainage hose and affix the hose to the pan adapter,
then secure the hose with a tie strap.
Attach the enclosed hose ties. These are fitted with 400 mm of space between them, with
an inclination of approx. 5°. Drill using a 6 mm drill. Then press the drainage hose into the-
se hose ties. Drainage hose for service water wells, for example downpipes, external stone
caissons or for suitable drains within the building.
S t e p
E
– F i t t i n g t h e h e a t i n g p u m p
Now fit the pump onto the vibration dampers by moving the
heating pump’s feet holes to the vibration dampers’ threaded
rods.
When the pump is in place, secure it in the vibration dampers
with flat washers and nuts.
S t e p
F
– C o n n e c t i o n o f e l e c t r i c i t y
Attach the connection cable to an earthed wall socket.
A suitable fuse is 10A/220 - 240v/50Hz
Tools/equipment:
13 mm box wrench
Screwdriver
Cable puller
Earthed outside wall socket, double
NB: No additional plugs are
needed if you are drilling into
wood/concrete/a tiled wall.
Make sure that the stand is Balanced
Centre on the rear left-hand corner of the outdoor unit.
ClimaLine Pancake Heated Drain Pan | Patent 539 251 | Produced by Climaco Sweden AB | www.climaco.com | [email protected]
