26
Loosen the bolts and separate in middle at an angle
B
PC panel bottom with PVC
anti-dust strip P7
V042
I1
B
B
B
I1
G1
I1
For the last polycarbonate panel assembly
1.
At first, You should dismantle the curved corner bar, by loosening the bolts attaching horizontal rail and hanging basket
bar (Don’t loosen ridge top bolt and nut). And separate curved corner bar a little in middle, and make an angle with
glazing bar.
2.
Put on cross bar #V042 on top of PC panel #B, and PVC anti-dust strip P7 on bottom of PC panel #B firstly. Then as-
semble them on horizontal rail together.
3.
After, insert polycarbonate panel #I1 between curved corner bar and curved glazing bar.
4.
Finally, push them together, and tighten all the bolts and nuts which were loosened before.
5.
Repeat this on the opposite side.
