www.directed.com
42
5.
Turn Ignition Off, siren chirps 3 times as confirmation of exiting programming.
N
NO
OTTEE:: If ignition remains on after entering PIN code and no action for 10 seconds,
unit will automatically exit programming mode without chirps.
To return to normal BlackJax Operation
1.
Turn ignition on.
2.
Enter Pin code.
3.
Within 10 seconds: Press lock/unlock button of remote control.
4.
Siren chirps 2 times as confirmation of BlackJax active.
5.
Turn ignition off, siren chirps 3 times as confirmation of exiting programming.
N
NO
OTTEE:: If ignition remains on after entering PIN code and no action for 10 seconds,
unit will automatically exit programming mode without chirps.
remote adjustable omnisensor
The Omnisensor is designed for ease of adjustment by the user and to give the ulti-
mate in impact detection without the possibility of false triggers that are common with
less sophisticated sensor.
installing the omnisensor
The omnisensor can be located in either the passenger or engine compartment. It must
be firmly mounted with the indicator arrow pointing UP to a vertical metal surface. For
best results it must be secured sheet metal screws using ALL FOUR mounting points.
adjusting the omnisensor
While adjusting this sensor it is required that you strike the vehicle with the amount
force that is desired for the system to trigger.
C
CA
AU
UTTIIO
ON
N!! DO NOT strike window glass or flat sheet metal panels that can dent eas-
ily. It is recommended that you only strike the metal pillars between the windows, they
are structurally sound enough not to dent. ONLY strike the pillars using the heel of your
hand, it is more than sufficient for the sensor distinguish as a theft attempt.
1.
Disarm system.
2.
Transmit Channel 15 (Press
3 times then
1 time).
z
The LED will turn on and the siren will chirp 1 time.
z
Sensor test and adjustment mode is entered.
