© 2004 directed electronics, inc.
41
1.
Ignition on.
z
System sees input on Zone 7 ignition input.
2.
Door Open & Close.
z
System sees input on H1/8 or H1/9 Door trigger input.
3.
Press and release brake pedal.
a.
System sees (+) input on H2/11 BROWN/WHITE brake input/output wire.
b.
System then begins monitoring input on H1/4 VIOLET/BLACK wire or
Intellistart 4.
c.
System sees RPM at or above 2 x programmed rate, BlackJax begins 20
second countdown.
4.
After a 20 second countdown:
a.
5 siren chirps as reminder to enter PIN code.
b.
Brake light relay pulses (+) 12v on H2/11 BROWN/WHITE to flash brake lights.
c.
You then have 20 more seconds to enter PIN to turn off Blackjax.
5.
If PIN code is NOT entered within 20 seconds:
z
System sounds siren and begins flashing parking lights.
z
Brake lights continue to flash.
z
The system will now immobilize as described in steps 6-7.
6.
If system sees the RPM rate return to 1 ½ times programmed RPM rate or lower,
the system will immobilize the vehicle as described in step 7.
7.
Vehicle Immobilization:
z
immobilizer will engage the starter and ignition circuits.
z
The siren will continue to sound and the parking and brake lights will flash
for a maximum of 5 minutes.
z
Immobilization circuits will remain active until correct PIN code is entered.
blackjax deactivation sequence
To deactivate BlackJax turn the key on and then enter the PIN code at any time.
bypass blackjax temporarily (if on in program grid)
Bypass BlackJax temporarily
1.
Turn ignition on.
2.
Enter PIN code. Do not enter valet or programming mode.
3.
Within 10 seconds: Press lock/unlock button of remote control.
4.
Siren chirps 1 time as confirmation of BlackJax bypassed.
