9
AFTER SALES SUPPORT
(AU) 1300 886 649 (NZ) 0800 836 761 | [email protected]
Getting Started (Cont.)
Assembling the base and stand
post
Each part of your new fan is designed to
fit together and be disassembled easily
for cleaning or storage
1
First, unscrew the locking lever and
washer from the bottom of the
stand post.
2 Insert the bottom of the stand post
through the hole in the top of the
base.
3 Tip up so that the underside of
the base is accessible. Then fasten
in place and tighten by using the
locking lever and washer.
4 Stand the base upright on the floor.
Fully unscrew (anticlockwise) the
clamping ring at the top and remove
it.
