13
AFTER SALES SUPPORT
(AU) 1300 886 649 (NZ) 0800 836 761 | [email protected]
Instructions
Tilting the fan head
The fan head can
be adjusted up and
down as required.
Before adjusting the
tilt angle, always
ensure the fan is
switched off and
unplugged.
To adjust the tilt
angle, grasp the fan
grilles and tilt the
head either upward
or downward as
required.
Height adjustment
CAUTION:
The fan head is very
heavy. Ensure the weight of the head
assembly is being held securely while
the clamping ring is loosened as it may
drop!
To adjust the fan
height, unscrew to
loosen the clamping
ring (anticlockwise),
slide the extension
tube up or down to
your desired height
and then retighten
the clamping ring
(clockwise) to lock in
place.
Fan on / off / speed control
Rotate the speed control knob on
the motor housing to the appropriate
position to start the fan.
Speeds:
[ 1 ] = low
[ 2 ] = medium
[ 3 ] = high
[ 0 ] = OFF
Oscillation
The oscillation button
is located on top of the
motor housing.
To start the fan
oscillating from side to
side, first ensure the fan
speed is set to either
position [ 1 ], [ 2 ] or [ 3 ]
then press the oscillation
button to the ON [ I ]
position. The fan head
will start to swing from side to side while
blowing air.
To stop oscillation, press the oscillation
button to the [ O ] position.
NOTE: The fan must be running for
the oscillating function to work. If
the oscillation button is in the ON [ I ]
position when the fan speed control is
set to the OFF [ 0 ] position, the fan will
also stop oscillation.
