10
AFTER SALES SUPPORT
(AU) 1300 886 649 (NZ) 0800 836 761 | [email protected]
Getting Started (Cont.)
5 Place the cover over the top of the
post and drop it down.
6 Drop the cover all the way down so
that it sits on top of the base and
covers the base screws.
7 Pull out the chrome extension
tube as far as it will go, then refit
the clamping ring and tighten
(clockwise).
8 Take the motor assembly. Loosen
the thumb screw on the back. Align
the head assembly motor mount
over the top of the chrome tube,
lower it down and then tighten the
locking thumb screw.
