manualshive.com logo in svg

Clevo NB55TK1, User Manual, Page: 83 / 304

Share
Download
Clevo NB55TK1 User Manual Download Page 83

Storage Devices, Mouse, & Audio

Mouse Properties Control Panel 3 - 5

3

Mouse Properties Control Panel

You can configure the functions from the 

Mouse

 control panel in 

Windows 

as fol-

lows.

1.

Right-click the 

Start Menu

 icon.

2.

Select 

Control Panel 

under the

 Windows System 

item in the

 Start Menu

.

3.

Click 

Mouse

 (

Hardware and Sound > Devices and Printers

).

4.

Click the menu headings tabs to adjust your mouse preferences.

Disabling the 

Touchpad

If you need to disable
the Touchpad for any
reason (e.g. you may
find that when using
the computer’s internal
keyboard you acciden-
tally trigger the Touch-
pad when resting your
wrists or palms on it)
you can do so by using

Fn + F1

 key combina-

tion.

 Figure 3 - 2

Mouse Properties 

Control Panel - 

Buttons

Summary of Contents for NB55TK1

















































































































































































































































































































Reviews:

No comments