Clevo NB55TK1 User Manual Download

Page: 145 / 304

Modules

Setting Up SATA RAID, Optane™ or AHCI Mode 6 - 3

Intel

Rapid Storage Technology Application

Make sure you install the

Intel® Rapid Storage Technology

application if you

have set up your system in

Intel RST Premium

(for

Intel

Optane

™

) mode (see

“Intel® Rapid Storage Technology” on page 6 - 41

After setting the SATA mode to

Intel® Optane™ and installing the Intel® Rapid

Storage Technology

application, DO NOT uninstall the

Intel® Rapid Storage

Technology

application.

See

“RAID Setup (2 * PCIE SSDs) - UEFI Enabled” on page 6 - 5

“RAID Setup

- UEFI Disabled” on page 6 - 11

“Intel® Optane™ Setup Procedure” on page 6

- 16

for further details.

Note that your system can be set up as a RAID OR to support Intel® Optane™,
it cannot be set to support both systems.



Intel

Optane

™

Intel® Optane™ is a combi-
nation of a compatible
memory device and Intel
Rapid Technology soft-
ware. This combination is
designed to speed up your
system performance.

Contact your distributor or
supplier to see if your sys-
tem supports this technolo-
gy.

SATA Mode

Selection

If you have installed the

Windows

OS with either

AHCI or Intel RST (Op-
tane)

mode enabled,

NOT

disable the set mode

(if you wish to disable the
set mode you will need to
reinstall the

Windows

OS).

Summary of Contents for NB55TK1

















































































































































































































































































































Search results

Summary of Contents for NB55TK1

Reviews:

Related manuals for NB55TK1

Brands by name

Popular brands

Clevo NB55TK1, User Manual

Search results

Summary of Contents for NB55TK1

Reviews:

Related manuals for NB55TK1

Brands by name

Popular brands