Clevo NB55TK1 Page 290 User Manual Download

Page: 290 / 304

Video Driver Controls

C - 32 Intel® HD Graphics Control Panel

Click the

Display

menu at the top of the screen to display the sub-menus. The

Mul-

tiple Displays

menu allows you to configure the display mode of any attached dis-

plays (see

“Attaching Other Displays” on page C - 41

). Click

Apply

to save any

changes made.



Multiple Display

At least one other dis-
play must be attached in
order to view multiple
display

selection op-

tions.

Audio Settings

Any attached active dis-
plays must have audio
capacity to allow audio
configuration.

Figure C - 26

Intel® HD Graphics

Control Panel

Display - Multiple

Displays

Summary of Contents for NB55TK1

















































































































































































































































































































Search results

Summary of Contents for NB55TK1

Reviews:

Related manuals for NB55TK1

Brands by name

Popular brands

Clevo NB55TK1, User Manual

Search results

Summary of Contents for NB55TK1

Reviews:

Related manuals for NB55TK1

Brands by name

Popular brands