Clevo NB55TK1 User Manual Download Page 153

Page: 153 / 304

Modules

Setting Up SATA RAID, Optane™ or AHCI Mode 6 - 11

RAID Setup - UEFI Disabled

To configure your RAID (Redundant Array of Independent Disks) system in Strip-
ing (RAID 0) or Mirroring (RAID 1) modes (see

Table 6 - 1, on page 6 - 4

) you will

require

two

identical

hard disks or solid state drives.

You need to setup a RAID before installing your

Windows 10

operating system, and

you will need to prepare the following in order to do so.
==========================================================
• The

Microsoft Windows 10 OS DVD

• An attached external DVD drive.
• Two Identical solid state drives.
• The

Device Drivers & Uti User’s Manual

disc.

==========================================================

Start-up your notebook computer and press <F2>

to enter the

BIOS

Go to the

Boot

menu, select

UEFI Setting

and press <Enter> (see page

5 - 20

Set

UEFI Boot

to “

Disabled

”.

Press <Esc> to exit the menu and go to the

Advanced

menu.

Select

SATA Mode

(see page

5 - 13

), press <Enter> and select “

Intel RST

Premium...

”.

Press <F4> and <Yes> to “

Save Changes and Reset

”.

As the computer restarts press

Ctrl + i

to enter RAID configuration menu.

Select

1.Create RAID Volume

and press Enter.

Summary of Contents for NB55TK1

















































































































































































































































































































Search results

Summary of Contents for NB55TK1

Reviews:

Clevo NB55TK1, User Manual, Page: 153 / 304

Search results

Summary of Contents for NB55TK1

Reviews: